Planet PL-IGS-620TF 4 Port Gigabit 2 Port SFP Endüstriyel Ethernet Switch

Endüstriyel Tip Yönetilemeyen Ethernet Switch (Industrial Unmanaged Ethernet Switch)
4 x 10/100/1000Base-T
2 x 1000BASE-SX/LX/BX SFP/mini-GBIC yuva (Port-5 ve Port-6), 100Base-FX SFP uyumlu
IP30, -40~75 Derece C  
 

Physical Port

• 4-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
• 2-port SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured

Fiber Port Redundancy

• Link status auto-detect and redundant on Dual ports with the same connector type
• Only Primary-Port is active at a time, the Backup-Port is blocked
• When Primary-Port link failure occurs, the traffic will swap to Backup-Port automatically.
• Once the Primary-Port status is back to link-up, the traffic will swap from Backup-Port to Primary-Port.

Layer 2 Features

• Supports Auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
• High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
• 9K Jumbo Frame Size support
• Backplane (Switching Fabric): 12Gbps
• Integrated address look-up engine, support 1K absolute MAC addresses
• Automatic address learning and address aging
• CSMA/CD Protocol

Industrial Case / Installation

- 12 to 48V DC, redundant power with polarity reverse protect function

- AC 24V power adapter acceptable

• Slim IP30 metal case protection
• DIN Rail and Wall Mount Design
• Redundant Power Design
• Supports EFT protection 6000 VDC for power line
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature

Hardware Specifications
Copper Ports	4 x 10/100/1000Base-T RJ-45 TP Auto-MDI/MDI-X, Auto-Negotiation
SFP / mini-GBIC Slots	2 1000Base-SX/LX/BX SFP interfaces (Port-5 and Port-6) Compatible with 100Base-FX SFP
DIP Switch	DIP-1: SFP Port 5 1000Base-X (default) / 100Base-FX DIP-2: SFP Port 6 1000Base-X (default)/ 100Base-FX DIP-3: Switch mode / Fiber Redundant mode
Connector	Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Alarm	Provides one relay output for power failure Alarm Relay current carry ability: 1A @ DC 24V
LED	3 x LED for System and Power: 　■ Green: DC Power 1 　■ Green: DC Power 2 　■ Green: Power Fault 2 x LED for Per Copper Port (Port-1~Port-4): 　■ Green: 1000 LNK/ACT 　■ Orange:100 LNK/ACT 1 x LED for Per mini-GBIC interface (Port-5 and Port-6): 　■ Green: LNK/ACT
ESD Protection	6KV DC
EFT Protection	6KV DC
Enclosure	IP30 type metal case
Installation	DIN rail kit and wall mount ear
Dimensions (W x D x H)	135 x 87 x 32mm
Weight	503g
Power Requirements	DC 12~48V or AC 24V Redundant power with polarity reverses protection function
Power Consumption / Dissipation	7.2watts / 24BTU
Cable	Twisted-Pair 　10Base-T: 2-Pair UTP CAT. 3, 4, 5, up to 100 meters 　100Base-TX: 2-Pair UTP CAT. 5, 5e up to 100 meters 　1000Base-T: 4-Pair UTP CAT. 5e, 6 up to 100 meters Fiber-Optic Cable 　1000Base-SX: 　　50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 550m 　1000Base-LX: 　　9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/70/120 　　kilometers (vary on SFP module) 　100Base-FX: 　　● 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 2 　　　kilometers 　　● 9/125μm single-mode fiber optic cable, up to 20/40/60 kilometers 　　　(vary on SFP module)
Switch Specification
Switch Processing Scheme	Store-and-Forward
Address Table	1K entries
Flow Control	Back pressure for half duplex IEEE 802.3x Pause Frame for full duplex
Switch fabric	12Gbps
Throughput (packet per second)	8.93Mpps@64bytes
Maximum Transmit Unit	9216 bytes
Speed	SX/LX: 2000Mbps (full-duplex) FX: 200Mbps (full-duplex) TP: 10/20Mbps, 100/200Mbps, 2000Mbps
Standards Conformance
Standards Compliance	IEEE 802.3 Ethernet / 10Base-T IEEE 802.3u Fast Ethernet / 100Base-TX IEEE 802.3ab Gigabit Ethernet / 1000Base-T IEEE 802.3z Gigabit Ethernet / 1000Base-SX/LX IEEE 802.3x Full-Duplex Flow Control
Regulation Compliance	FCC Part 15 Class A, CE
Stability Testing	IEC60068-2-32(Free fall) IEC60068-2-27(Shock) IEC60068-2-6(Vibration)
Environment
Temperature	Operating: -40~75 degree C Storage: -40~75 degrees C
Humidity	Operating: 5~95% (Non-condensing) Storage: 5~95% (Non-condensing)